Let’s get started. This is definitely a software/soundcard issue. If you have a home studio, you likely already have one of these, but if you’re just starting out, or for some reason are lacking one, the USB version is a good alternative as well. I also would be curious why you want to invest outside of the mic, though I did the same with a similar priced mic and was happy myself. Other than that, the 2035 is hardly any different than its cheaper counterpart. If it is, please undertake the following: Google for and download the DPCLAT.EXE utility. Audio-Technica is Japanese audio equipment manufacturer with a lot of history. All rights reserved. But even then the soundcard will have a very disapointing quality. Look for a cheap interface, like the Scarlett 2i2 and you can get started. At the same time, this may make the 2035 sound muddy without the filter if you’re recording bass-heavy instruments. If you are someone who is recording a lot of different sounds, and you want a cheap mic with a switchable filter, go with the AT2035. This also makes it a good mic for vocals, guitar amps, drums, and brass or wind instruments. You can use these mics to record nearly anything. Essentially, it gives you the option of cutting low-end frequencies, which is helpful for when recording vocals or other sounds that don’t necessarily require that it. If you think this is the correct answer just mark it as the answer. Onyx WordPress Theme by EckoThemes. The attenuation pad lowers the overall gain of the mic by 10 dB. By using our site, you acknowledge that you have read and understand our Cookie Policy, Privacy Policy, and our Terms of Service. I may pick one up soon as my next mic! Notable examples include the ATH-M50 (and M50x) monitoring headphones and the AT20-series condenser microphones. This filter has a cutoff frequency of 80 Hz, and it can help to cut back on any added muddiness that the AT2035 may have over the 2020. I find this makes it better for vocals than the AT2020 and with its lower signal to noise ratio, pulling the mic back to capture a bit more of the room sound can be really nice. As far as polar patterns go, they’re about just as similar as they are in appearance. If you lack any equipment at all, go with the current AT2020 bundle. Also - what type of drivers are you using? If it's a condenser it could possibly be a power thing. At first glance, these mics look nearly identical in a physical sense. To learn more, see our tips on writing great answers. Starting with the treble, we can see that AT2020 has a definite and clear increase starting at roughly 15 kHz and ending at 3500 Hz. For example, I can’t hear anything above 16kHz. It's definitely not anything to do with mic placement or gain or any of that. While the switch is a thoughtful addition, it’s really nothing you can’t do yourself. ophone stands. Can verbs/i-adjectives be indefinitely conjugated, or is there a limit? Both the 2020 and 2035 are categorized as large diaphragm condenser microphones . The microphone I'm using is the AT-2035 which is a condenser microphone. The frequency response of the AT2020 is relatively flat, with slight cuts around the 70-80Hz mark, and a boost on the high end for added clarity. A stardard computer soundcard do not work with it. Stu is determined to help you make sound decisions, and strives to deliver the best and most in depth content on the internet! Were English poets of the sixteenth century aware of the Great Vowel Shift? We’ll look at things like the frequency response graphs, polar patterns, specifications, pros and cons for each mic, and some audio samples to gauge the way each sounds and performs in practice. There isn’t much of a difference in these two between around 500 Hz and 3500 Hz. Thanks for contributing an answer to Sound Design Stack Exchange! The AT2020 sees a gradual decline beginning at roughly 350 Hz, which becomes even more apparent beginning at 200 Hz.