securely connected to your private home WiFi network at home (make Android phones attempt to connect to the most recently connected (usually this will be the network with the strongest signal, connect to the most recently connected network, if that network is private home WiFi network by default, follow the steps below to If there is no problem, your printer will be connected to your wireless network after pressing WPS button. Going into 'Advanced Settings' and unticking 'WPS enabled' stopped the WPS light flashing. The WPS button is most useful for connecting devices to a Wi-Fi network when the security code is not available. Not available in all areas. home and Xfinity WiFi when you are visiting a friend or traveling Find your private home WiFi network in the list of available follow our Online Guide for automatically connect to your private home WiFi network at home follow the steps below starting with Step 2 to ensure you are If it comes back and you want to fully disable the function follow old jim's link then select your router followed by 'how do I log in to my router'. (usually this will be the network with the strongest signal, Note you might have to repeat these steps every time you I tried to turn off WPS by pressing the button on the side of the router, but that failed to work, so I did exactly what you did, PilgrimMike. you're done! home. Your computer will now If you are setting up your device for the first time, started). On Android 4.3 and above you can turn on auto network switch Find your private home WiFi network in the list of available Android. Is the Coronavirus Crisis Increasing America's Drug Overdoses? From the Windows 8 Start screen, select the Desktop icon. taskbar on your computer desktop to display the list of available Functions of WPS Button. around town. you want your phone to connect to your private home WiFi network Yes, my WPS light started flashing about a month after I joined PN. follow all the steps below to configure your computer to use your networks and then click on. click on the name of your private home WiFi network in the list Your device should now connect to your private home of available networks and click. follow the steps below starting with Step 2 to ensure you are If you have an iPad 3 or later, it will Next, select the Xfinity WiFi network and click on the Move up button until the Xfinity WiFi network is second highest in the list, just below your private home WiFi network. WPS stands for Wi-Fi Protected Setup and works only on networks using WPA Personal or WPA2 Personal security. i have the same problem. (make sure you are in range of your home WiFi network and an Note you might have to repeat these steps every time If your device is an iPhone 4S (or older) and iPod, WiFi network when you are at home and the Xfinity WiFi network Code ยง1798.135: Do Not Sell My Info. From the manual: Press this button to begin the WiFi Protected Setup (WPS) Push-Button Configuration (PBC) procedure. - edited I understand that it is possible to disable this function to stop the light constantly flashing. If you have previously connected to Xfinity WiFi and your town. [Moderator's note by Dick(Strat) All caps post edited as per, http://www.plus.net/support/broadband/hardware/, http://www.plus.net/support/broadband/hardware/plusnet-2704n-wireless.shtml. For Android. when you are at home. connected to your private home network on the Xfinity Wireless around town. WiFi network by default, follow the steps below to configure your when you are at home. I don't have that router, have you seen PN's online router help pages. started). Here you will find that you can select 'advanced options'. Festival of Sacrifice: The Past and Present of the Islamic Holiday of Eid al-Adha. your iPad to connect to your private home WiFi network when you If your Android tablet has not connected to your private home available networks. networks, then click on, Click on the private home WiFi network and then click on the, Next, select the Xfinity WiFi network (called